IGBT DRIVERS : PrimePACK Electrical
Plug & Play Driver for PrimePACK Electrical SeriesIGBT Drivers are designed to address a wide variety of IGBT applications. The AS2-PrimePACK Electrical Series provides up to 12 Amps of peak current at an operating frequency up to 25 KHz. UVLO and Desat fault detection is provided for both the high and low side drivers. Fault lines are provided for the high and low side independently or can be output as a single fault through a single output.
Please visit PrimePACK Slave series if you are looking at parallel operation. |
|
Parameter Overview
Parameter Min Typical Max Unit
Nominal Supply Voltage 14.3 15 17.5 V
Output Power Per Channel 5.0 W
Gate Voltage -9 +15/-10 +16 V
Peak Output Current (Gate Current) -10 +12 A
Switching Frequency FIN 0 25 kHz
Minimum ON or OFF Period 450 500 ns
Turn-ON or OFF period 250 User-Defined ns
Dielectric Test Voltage 3000 VAC
Dv/dt Immunity, Input to Output 25 kV/us
Operating Temperature -20 +85(+125 opt) °C
Creepage Distance Primary-Secondary 8.0 mm
Switch Benefits
Dual channel driver Plug-and-play solution
Isolated DC/DC converter Interface for 3.3V or 5V logic levels
Regulated gate-emitter voltage +15V/-12V gate drive voltage
Separate gate current paths (on/off) Peak gate current +12A/-10A
Power supply under-voltage lockout (Opt.) Suitable for IGBTs up to 1700V
Reliable long service life IGBT short-circuit protection
Up to 8 individual fault signals (Opt.) 2 x 5W output power
IGBT & ambient thermal fault detection (Opt) Easy mounting directly onto the IGBT
20 Pin power, Dual 2 Channel Fiber I/O Desaturation (Over current) detection
Cross Latch (Opt.)
Parameter Min Typical Max Unit
Nominal Supply Voltage 14.3 15 17.5 V
Output Power Per Channel 5.0 W
Gate Voltage -9 +15/-10 +16 V
Peak Output Current (Gate Current) -10 +12 A
Switching Frequency FIN 0 25 kHz
Minimum ON or OFF Period 450 500 ns
Turn-ON or OFF period 250 User-Defined ns
Dielectric Test Voltage 3000 VAC
Dv/dt Immunity, Input to Output 25 kV/us
Operating Temperature -20 +85(+125 opt) °C
Creepage Distance Primary-Secondary 8.0 mm
Switch Benefits
Dual channel driver Plug-and-play solution
Isolated DC/DC converter Interface for 3.3V or 5V logic levels
Regulated gate-emitter voltage +15V/-12V gate drive voltage
Separate gate current paths (on/off) Peak gate current +12A/-10A
Power supply under-voltage lockout (Opt.) Suitable for IGBTs up to 1700V
Reliable long service life IGBT short-circuit protection
Up to 8 individual fault signals (Opt.) 2 x 5W output power
IGBT & ambient thermal fault detection (Opt) Easy mounting directly onto the IGBT
20 Pin power, Dual 2 Channel Fiber I/O Desaturation (Over current) detection
Cross Latch (Opt.)
