IGBT DRIVERS : PrimePACK Fiber
Plug & Play Driver for PrimePACK Fiber SeriesIGBT Drivers are designed to address a wide variety of IGBT applications. The AS2-PrimePACK Fiber Series provides up to 12 Amps of peak current at an operating frequency up to 25 KHz. UVLO and Desat fault detection is provided for both the high and low side drivers. Fault lines are provided for the high and low side independently or can be output as a single fault through a single fiber output.
Please visit PrimePACK Slave series if you are looking at parallel operation. |
|
Parameter Overview
Parameter Min Typical Max Unit
Nominal Supply Voltage 14.3 15 17.5 V
Output Power Per Channel 5.0 W
Gate Voltage -9 +15/-10 +16 V
Peak Output Current (Gate Current) -10 +12 A
Switching Frequency FIN 0 25 kHz
Minimum ON or OFF Period 450 500 ns
Turn-ON or OFF period 250 User-Defined ns
Dielectric Test Voltage 3000 VAC
Dv/dt Immunity, Input to Output 25 kV/us
Operating Temperature -20 +85(+125 opt) °C
Creepage Distance Primary-Secondary 12.8 mm
Creepage Distance Secondary-Secondary air gap 8.5 mm
Switch Benefits
Dual channel driver Plug-and-play solution
Isolated DC/DC converter +15V/-10V gate drive voltage
Regulated gate-emitter voltage Peak gate current +30A/-25A
Separate gate current paths (on/off) Suitable for IGBTs up to 1700V
Power supply under-voltage lockout (Opt.) IGBT short-circuit protection
Reliable long service life 2 x 5W output power
Up to 8 individual fault signals (Opt.) Easy mounting directly onto the IGBT
IGBT & ambient thermal fault detection (Opt) Desaturation (Over current detection)
10 Pin power, Dual 2 Channel Fiber I/O 2 channel input, Independent or combined fault output
Cross Latch (Opt.)
Parameter Min Typical Max Unit
Nominal Supply Voltage 14.3 15 17.5 V
Output Power Per Channel 5.0 W
Gate Voltage -9 +15/-10 +16 V
Peak Output Current (Gate Current) -10 +12 A
Switching Frequency FIN 0 25 kHz
Minimum ON or OFF Period 450 500 ns
Turn-ON or OFF period 250 User-Defined ns
Dielectric Test Voltage 3000 VAC
Dv/dt Immunity, Input to Output 25 kV/us
Operating Temperature -20 +85(+125 opt) °C
Creepage Distance Primary-Secondary 12.8 mm
Creepage Distance Secondary-Secondary air gap 8.5 mm
Switch Benefits
Dual channel driver Plug-and-play solution
Isolated DC/DC converter +15V/-10V gate drive voltage
Regulated gate-emitter voltage Peak gate current +30A/-25A
Separate gate current paths (on/off) Suitable for IGBTs up to 1700V
Power supply under-voltage lockout (Opt.) IGBT short-circuit protection
Reliable long service life 2 x 5W output power
Up to 8 individual fault signals (Opt.) Easy mounting directly onto the IGBT
IGBT & ambient thermal fault detection (Opt) Desaturation (Over current detection)
10 Pin power, Dual 2 Channel Fiber I/O 2 channel input, Independent or combined fault output
Cross Latch (Opt.)
